想附上附上kernel 3.6.11的驱动,但是无法上传。
先更新一些步骤:
1) copy 8188eu.ko 到 /lib/modules/3.6.11+/kernel/drivers/net/wireless
2) 修改/ect/network/interfaces:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-driver wext
pre-up wpa_supplicant -Dwext -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
-B
#wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
3) 修改/etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
#update_config=1
# WPA2-PSK network
network={
ssid="Your WiFi's ssid"
scan_ssid=1
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="Your WiFi password key" # generate using wpa_passphrase
}
然后重启你的Raspberry Pi. 然后就可以拔掉网线,享受无线了
。